The gutter guard serves an important purpose in protecting houses and structures from rainfall damage. The obstruction of gutters by debris makes it impossible to remove water from building rooftops securely.
The weight of the junk particles in these gutters causes them to droop and separate from the roof. Mold development, decay, and structural damage are caused due to this.
As a result, gutter guards keep dirt out of the gutters while allowing water to flow freely.
Aluminum is the most used material for gutter guards and gutter screens, especially surface tension gutter guards. It’s popular because of its small weight, ease of molding, and extended durability.
Due to these qualities,a professional-grade aluminum gutter guard like titan 3000 is the best option for most areas.
Here’s everything you need to know about the titan 3000 gutter guards:
Why Use Titan 3000?
Titan 3000 Gutter guard is the industry leader in gutter protection, and we’ll explain why.
This system is designed and constructed of powder-coated metal for long-lasting, sturdy protection. The guard on this model has a V-shape design that allows for high-speed filtration of enormous volumes of water. Isn’t that what we all need?
These professional-grade aluminum structures fit your gutter precisely, whether it’s new or old, and can withstand even the most severe storms thanks to their extreme weather endurance.
They also prevent any undesirable clogging. With a 20-year guarantee, they can fit 4, 5, and 6 K-Style metal gutters. They are available in 4′ and 10′ lengths and 5″ and 6″ width in a flat and step-up design.
Not only this, but these guards have a neutral hue that blends perfectly with your home’s roofline.
They use the same simple same-and-lock fitting mechanism as the top Amerimax model. To crown it all, you don’t need to spend any extra cash on the lock system as the cost is already included in the sum.
It screws directly to the fascia board and the front of the gutter, reinforcing the complete gutter system with only 50 pieces, making the installment super easy.
This system is perfect for a modern home with a contemporary exterior design. There’s no need to engage an expert to install, but handling sharp tools and scary ladders should be a professional’s job. This model is Amerimax’s flagship guard and a fantastic choice for your house.
| Pros | Cons |
| Titan 3000 gutter guard is made up of aluminum, giving it long durability and sustainability. | Some pieces have 1-10 unpunched holes. |
| Low maintenance is required. | Self-tapping sheet metal screws not included with the product. |
| It can be easily screwed on the top of the gutter. | Water can drip over the edge of the gutter in several places at the joints in case of heavy rainfall. |
| It does not require sealant. | Sometimes the small perforations accumulate snow. |
| A value-for-money option amongst other expensive gutter guards. | Titan gutter guards are not uniform at the corners. |
How To Install Titan 3000 Gutter Guards?
Some of you may have done home improvement tasks before and are confident in your ability to install the Titan 3000 gutter covers. Let us explain the essentials.
The process is extremely simple. The only tools you need to gather are –Tin snips, gloves, safety glasses, cordless drill, #8 Hex Bit, and a sturdy ladder!
The first step is to clean your gutters of all debris and then flush the system with water. Then check your gutters to make sure all hangers are securely fastened, with one hanger placed every 24 inches.
To begin, raise the roof shingles and slide the backside beneath each area to begin the installation. Then, with one screw every 24 inches, move the gutter guard forward and screw it into place along the gutter edge.
Then, in line with the screw in the front edge, secure the back edge of the TITAN 3000 to the drip edge/fascia board. Every 24 inches, continue to secure the front and back of the Titan Guard.
Next, you need to overlap parts by about an inch and secure them to the gutter lip. After that, miter cut the adjoining portion and notch front edge to provide an overlap for outside and interior corners. Using a screw, connect the overlapping parts.
And you will be all set to sit back and relax while clogged gutters become a thing of the past!
However, one important thing to note here is that a splash guard diverter on top of the TITAN 3000 is required for inside bends and valleys. If this process seems hard, then don’t worry because MidAtlantic Installation got your back.
Frequently Asked Question – FAQs
How much does a Titan 3000 gutter Guard battery weigh?
It weighs around 9.03 pounds.
Titan 3000 is made up of which texture?
It is made up of a mesh surface that filters fine debris such as pine needles and provides an extra layer of protection.
Is it ideal for extreme weather?
Yes, Titan 3000 gutter guard is ideal for heavy rainfall and snowfall.
Which material is used to make the Titan 3000 gutter guard?
Titan 3000 is made up of aluminum, which has a perforated design.
What are its dimensions?
- 36 x 5 x 1 inch is the dimensions of Titan 3000.
MidAtlantic Installation
To be eligible for the Titan 3000 warranty, the gutter covers must be installed by professionals, and no one does it better thanus in Baltimore, Maryland. We have qualified employees, reliable vendors, and dependable contractors.
Call us now, and our highly trained and experienced staff will arrive with top-of-the-line equipment and take care of everything safely. Do you still have any reservations? We offer a 50-year warranty on all of our work.
So, call us right now and get a free estimate for any remodeling or roofing needs!
